Allover Central Polytechnic, Sango-Ota is a private tertiary institution in Ogun State that many prospective students consider because of its location along the Lagos-Ibadan corridor and its accreditation by the National Board for Technical Education (NBTE). This guide on the list of courses at Allover Central Polytechnic, Sango-Ota and their school fees is written for candidates preparing to apply for the 2026/2027 session. Anyone searching for the list of courses at Allover Central Polytechnic, Sango-Ota and their school fees usually wants two things at once: a clear breakdown of the programmes on offer, and an honest picture of what it costs to study there. This article covers both, along with admission requirements and other details that matter before you apply for the 2026/2027 session.
About Allover Central Polytechnic, Sango-Ota
Allover Central Polytechnic, commonly shortened to “Alloverpoly,” sits at Plot 3A & B, Abiodun Popoola Street, Sango-Ota, Ogun State. The institution was established under the provisions of Decree 9 of 1993, which permits private individuals and organisations to run tertiary institutions in Nigeria, and it has operated since the early 2000s as one of the private polytechnics serving the Ota-Sango axis. Its location places it close to the Ota Toll Gate and within reach of the Sango motor park, making it accessible to students commuting from Lagos, Abeokuta, and surrounding towns.
The polytechnic runs National Diploma (ND) and Higher National Diploma (HND) programmes, alongside part-time and diploma-level options for candidates who want a shorter route into a specific trade or discipline. The National Board for Technical Education recognizes its ND and HND awards, which means graduates can proceed to top-up degree programmes at universities or seek NYSC mobilization the same way graduates of federal and state polytechnics do.
List of Courses at Allover Central Polytechnic, Sango-Ota
The list of courses at Allover Central Polytechnic, Sango-Ota and their school fees spans engineering, management, and social science disciplines. The school groups its offerings roughly into three schools: the School of Engineering Technology, the School of Management Sciences, and the School of Environmental Studies. Below is a breakdown of the programmes available at both ND and HND levels.
- Accountancy
- Business Administration and Management
- Marketing
- Office Technology and Management (OTM)
- Public Administration
- Banking and Finance
- Statistics
- Computer Science
- Computer Engineering
- Electrical/Electronic Engineering
- Estate Management and Valuation
- Urban and Regional Planning
- Mass Communication
- Criminology and Security Studies (Diploma level)
Not every course runs at both ND and HND level in every session; some departments admit only at ND, then require students to complete a mandatory one-year Industrial Training (IT) placement before applying for HND admission elsewhere or at the same institution once the HND version of the programme is approved. Because course availability can shift from one admission cycle to the next, applicants should always confirm active programmes for the current session on the school’s admission portal or by visiting the admissions office directly.
Engineering and Technology Programmes
Computer Engineering and Electrical/Electronic Engineering form the technical core of the polytechnic’s offerings. These programmes combine classroom instruction with laboratory and workshop practicals, covering circuit design, digital electronics, and computer hardware/software fundamentals. Computer Science, while technically a science programme, is administered alongside these technology courses and focuses on programming, database management, and networking basics suitable for entry-level IT roles.
Management and Business Programmes
Accountancy, Business Administration and Management, Marketing, Banking and Finance, and Office Technology and Management make up the largest cluster of students at the polytechnic, a pattern common to most Nigerian polytechnics where business-related courses draw the highest enrolment. These programmes prepare graduates for roles in corporate administration, bookkeeping, sales, and office management, and they generally have lower entry requirements around mathematics-heavy subject combinations compared to the engineering courses.
Environmental and Social Science Programmes
Estate Management and Valuation and Urban and Regional Planning fall under the environmental sciences cluster and typically require credits in Mathematics, Economics, and either Geography or a related subject. Public Administration and Mass Communication round out the social science offerings, training students for careers in government administration, journalism, and public relations.
Taken together, this spread of programmes is what most searches for the list of courses at Allover Central Polytechnic, Sango-Ota and their school fees are trying to map out before applying, since the right course choice should match both career goals and what a family can comfortably afford each session.
Admission Requirements for Allover Central Polytechnic
Before checking the list of courses at Allover Central Polytechnic, Sango-Ota and their school fees, it helps to confirm you meet the baseline admission criteria, since fees only become relevant once you have secured a place.
For ND (National Diploma) admission, candidates need:
- Five O’Level credits in WAEC, NECO, or NABTEB, including English Language and Mathematics, obtained in not more than two sittings.
- Three other subjects relevant to the chosen course of study.
- A JAMB UTME score that meets the polytechnic’s cut-off mark, which generally sits around 100 to 120, in line with the general polytechnic benchmark set by JAMB.
- Correct selection of Allover Central Polytechnic as a choice institution on the JAMB portal, or a Change of Institution form for candidates who did not list the school initially.
For HND (Higher National Diploma) admission, candidates need:
- A National Diploma from an NBTE-accredited polytechnic in a relevant field, usually with a minimum of Lower Credit.
- A completed one-year post-ND Industrial Training (IT) certificate.
- The same O’Level requirements that applied at the ND level.
The polytechnic also admits candidates through direct entry for diploma and part-time programmes, which suits applicants who could not sit for JAMB in a given year but still want to start their education without delay. Meeting these requirements is the first step before any conversation about the list of courses at Allover Central Polytechnic, Sango-Ota and their school fees becomes useful, since admission has to be secured before fee payment applies.
Allover Central Polytechnic School Fees Breakdown
This is the section most applicants are searching for directly: the list of courses at Allover Central Polytechnic, Sango-Ota and their school fees in naira terms. As a private institution, Allover Central Polytechnic charges tuition that is higher than what obtains in federal and state-owned polytechnics, though still moderate compared to many other private polytechnics in the South-West.
| Fee Component | Approximate Amount (₦) |
|---|---|
| Acceptance Fee | 15,000 |
| Tuition Fee (per session, average across courses) | 70,000 – 150,000 |
| Departmental/Practical Fee (Engineering courses) | Included in higher end of range |
| ID Card, Library, and Sundry Charges | Varies, usually a few thousand naira |
Fees are not identical across all departments. Engineering-based programmes such as Computer Engineering and Electrical/Electronic Engineering typically fall on the higher end of the range because of laboratory, workshop, and practical costs, while management and social science courses like Accountancy, Business Administration, and Public Administration tend to sit closer to the lower end. HND students often pay a similar range to ND students, though returning students may see a modest reduction compared to fresh admission fees, since new intakes usually cover a one-time acceptance fee that returning students do not repeat.
It is worth noting that private polytechnic fees change from one admission cycle to another, influenced by inflation, cost of instructional materials, and general economic conditions in Nigeria. The figures above represent a reasonable estimate for prospective 2026/2027 applicants based on recent fee patterns, but they are not a substitute for the official fee schedule published by the school’s accounts or admissions office each session. Students should treat any figure quoted online, including in this article, as a planning guide rather than a final invoice, and should verify the exact amount through the polytechnic’s official portal or bursary department before making payment.
Anyone budgeting ahead of the 2026/2027 session should approach the list of courses at Allover Central Polytechnic, Sango-Ota and their school fees as a moving target that needs a final check closer to the resumption date, rather than a fixed figure to lock in months in advance.
What the Fees Typically Cover
School fees at Allover Central Polytechnic generally cover tuition instruction, access to the library, use of the ICT centre, and basic administrative services for the session. They do not usually cover accommodation, feeding, textbooks, or personal practical materials that some engineering and technical courses require students to purchase individually. Students planning their budget for a session should add these extra costs on top of the published tuition figure, since accommodation alone, whether on-campus or in the surrounding Sango-Ota community, adds a significant amount to total spending for the session.
This distinction matters when interpreting any list of courses at Allover Central Polytechnic, Sango-Ota and their school fees: the tuition figure alone rarely reflects the full cost of a session once accommodation, feeding, and course materials are added.
Why Course Choice Affects Total Cost
Course choice has a direct effect on how much a student ultimately pays across a full programme cycle. A student on a management-related course such as Business Administration or Marketing typically completes four semesters of ND coursework with fewer extra departmental charges. A student in an engineering programme, by contrast, pays departmental and practical fees each session on top of standard tuition, and may also need to budget separately for the required Industrial Training period before HND admission. Anyone comparing the list of courses at Allover Central Polytechnic, Sango-Ota and their school fees side by side should factor in this difference rather than assume every course carries an identical financial commitment.
Frequently Asked Questions
Is Allover Central Polytechnic accredited?
Yes. The National Board for Technical Education recognizes the polytechnic’s ND and HND programmes, and the Federal Ministry of Education lists it among approved private tertiary institutions in Nigeria.
What is the cut-off mark for admission?
The general cut-off mark for ND admission sits around 100 to 120 in JAMB UTME, in line with the national benchmark most polytechnics apply, though candidates should still confirm the exact figure for the current session.
Does Allover Central Polytechnic offer part-time programmes?
Yes, several departments run part-time and diploma-level options alongside the regular full-time ND and HND programmes, aimed at working candidates or those who need a flexible schedule.
Where can I confirm the exact school fees for my course?
The most reliable source is the polytechnic’s official admissions or bursary office, since fees vary by department and can change between sessions. Third-party estimates, including the figures in this article, should be treated as a guide rather than a final amount.